NU1XA Owner’s Manual

Basic Operations
On the screen display, you can call up three main functions: Voice, Song and Demo. In addition, various detailed settings can be made, for even greater playability and performance potential.

(Figure)
Menu button
Exit button

Voice: Instrument sound for playing from the keyboard. In addition to the Piano sounds, a wide variety of other musical instrument sounds are available.
Song: A piece of music for listening enjoyment or for playing back and practicing along with.
Demo: Voice Demos let you experience the characteristics of the Voices.

Selecting Voices
1. Press the [VOICE] button to call up the Voice group list.
2. Press the [Cursor up] or [Cursor down] button to select a Voice group.
(Figure)
When this is shown here, you can scroll through the display vertically.
[Cursor right] to select a Voice.
[Cursor left] to return.
3. Press the [Cursor up] or [Cursor down] button to select a Voice.
(Figure)
[Cursor right] to select a Voice.
[Cursor left] to return.
4. Play the keyboard.
Voice display
(Figure)
Press the [Cursor left] or [Cursor right] button to select the previous or next Voice.
This indicates the current position in the Voice group.

Selecting Songs and Demos
1. Press the [SONG/DEMO] button to call up the Song category list.
2. Press the [Cursor up] or [Cursor down] button to select a Song category.
(Figure)
When this is shown here, you can scroll through the display vertically.
[Cursor right] to select a Song.
[Cursor left] to return.
3. Press the [Cursor up] or [Cursor down] button to select a Song.
(Figure)
When “Lesson” is selected, press the [Cursor up] or [Cursor down] button to select a Lesson type.
[Cursor right] to select a Song.
[Cursor left] to return.
4. 
Press the [PLAY/PAUSE] button to playback the Song.
Song display
(Figure)
Use the [Cursor left] or [Cursor right] button to select the previous or next bars. 

Detailed Settings (Menu display)
1. Press the Menu button repeatedly to select the desired menu.
(Figure)
Menu icon
Menu name
2. Press the [Cursor up] or [Cursor down] button to select a parameter.
(Figure)
Note that the hierarchy depth differs depending on the selected parameter.
[Cursor right] to detailed settings.
Exit to return to the previous display.
[Cursor right] to detailed settings.
[Cursor left] to return.

Adjusting the value on the slider pop-up window
(Figure)
3. Press the [Cursor left] or [Cursor right] button to adjust the value, press the Exit button to close the pop-up window.

Selecting a value from a list
(Figure)
A checkmark is shown at the right of the selection.
3. Use the [Cursor up][Cursor down] buttons or the [Cursor right] button to select a setting.
Press the [Cursor left] button to return to the previous display.

Resetting to the Default Setting
If you want to reset the selected value to its default setting, press and hold the Menu button.

Changing the Control Panel Settings
You can change the time that elapses until the control panel turns off, or you can set it to remain on indefinitely. You can also set the operation sound to off. For details, refer to “Auto Backlight Off” or “Touch Panel Sound” on page 89.

NOTICE
Do not operate the control panel using a sharp item, your fingernails or other hard objects. This may damage the control panel.

Return to the Voice/Song display
Press the Exit button to return to the Voice display or the Song display, depending on which display was previously shown. 
While the pop-up window is shown, pressing the Exit button returns to the previously shown display. 


This is the end of the file.