R Series (SLOT)

General specifications

General specifications RSio64-D
Sampling frequency rate External 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm)
SRC SRC Lock Range: 39.7 kHz – 101.7 kHz, Sample Rate Ratio Limit: 1:2.6 to 2.6:1
Power requirements 100-240 V 50/60 Hz
Power consumption 60 W
Dimensions W 480mm
H 88mm
D 365mm
Net weight 6.1kg
Accessories Owner’s Manual, AC power cord
Others Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃

Signal Delay

SLOT IN (MY8-AE96) to SLOT OUT (MY8-AE96)
(@ fs=96 kHz, SRC off, Internal routing)
Less than 0.2 ms
SLOT IN (MY8-AE96) to Rio3224-D AES OUT
(@ fs=48 kHz, through Dante, SRC off)
(Dante Receive Latency set to 0.25 ms)
Less than 0.8 ms
SLOT IN (MY8-AE96) to Rio3224-D AES OUT
(@ fs=96 kHz, through Dante, SRC off)
(Dante Receive Latency set to 0.25 ms)
Less than 0.5 ms
SLOT IN (MY8-AE96) to Rio3224-D AES OUT
(@ fs=96 kHz, through Dante, SRC on, SLOT fs=48 kHz)
(Dante Receive Latency set to 0.25 ms)
Less than 1.1 ms

Digital I/O Characteristics

Terminal Format Data length Level Audio Connector
Primary/Secondary Dante 24 bit or 32 bit 1000 BASE-T 64 ch Input/64 ch Output@48 kHz
32 ch Input/32 ch Output@96 kHz
etherCON CAT5e

Control I/O Characteristics

Terminal Format Level Connector
WORD CLOCK IN TTL/75 Ω terminated BNC

External DC Input Characteristics

Terminal Format Level Connector
EXT DC INPUT*1 XLR-4-32 type*2

*1: Power Requirements: +24V±2V, 3A
*2: 1pin=GND, 2pin=NC, 3pin=NC, 4pin=+24V

PA-700 ACアダプター

SWP2、SWP1、RSio64-Dの電源を二重化運用するためのACアダプター

  • 入力電圧: AC100-240V
  • 出力電圧: DC24V
  • XLR4-11Ctypeコネクター
  • 寸法: 139.0(W) x 31.3(H) x 58.2(D) mm *ケーブルを除く
  • 対応機種: L2スイッチ「SWP2シリーズ」「SWP1シリーズ」、I/Oラック「RSio64-D」(スタジオモニターマネジメントシステム「MMP1」は非対応)